Solid State Logic AWS DELTA 916 Owner's Manual page 58

AWS 948 Tutorial
M S
ODE ELECTION
Modes are selected using the Function keys in the left-hand side of the centre
section (shown right). The channel mode options are displayed in the bottom
row of softkeys when none of the top row of switches are selected.
The channels to be configured are selected by pressing one or more channel
strip SEL keys, or globally using the ALL Function key.
Inline Trk Chan 22
CH EQ INS DYN
MON INS
MON INS
M-CHOP PRE
Misc TR Auto Lnks
EQ DYN C-ST
When the SET Function key (next to the ALL Function key) is selected, pressing any in-channel non-
latching switches (such as the RETURN switch) will cause that switch to activate in all selected channels
The mode and its basic signal path are indicated in the console TFT screen when the SSL > Chan softkey is pressed.
The LEDs below the in-channel RETURN switch also indicate the mode, as indicated in the summary table below:
Mode
TRK and ST Function keys and
In-line Mix
Channel Return all off
extra send
TRK and ST Function keys off,
In-line Mix
press channel Return switch
extra input
Select TRK Function key
In-line
Track (Channel Return switch off)
Select TRK Function key and
In-line
'Playback' channel Return switch
Stereo Press ST Function key
Page 2b-8
Chan Setup
CHOP
C-ST FX 1 FX 2
CHOP
NEXT
Chan DAW
FX 1 FX 2 TRK
Activation
The default mode is In-line Mix. Press TRK to activate In-line
Track mode. Press ST to activate Stereo mode. The switches
light to indicate In-line Track and Stereo mode. Note that the
TRK and ST buttons are inter-cancelling.
To use a mono channel configuration for basic tracking, simply
TRK
return to In-line Mix mode and ignore the secondary channel
path.
When in either
RETURN switches (near the pan pots in the
channel strips) are unselected, meaning that
the secondary path is sourced from the
SSL
primary path. Press RETURN to switch the
monitor path to the external signal. The
RETURN LED lights to indicate it is active.
Indication
Channel IN LINE LED is green,
no Function keys light.
Channel IN LINE and RETURN
LEDs are green, no Function keys light.
Channel IN LINE LED is red,
TRK Function key lights.
IN LINE is red, RETURN is green,
TRK Function key lights.
Channel STEREO LED is yellow,
ST Function key lights.
In-Line modes, the
Path 1
Mic / Line L
Mic / Line L
Mic / Line L
Input
source
Line L
AWS elta Owner's Manual
RETURN
Path 2
Extra
send
Line R
Channel
Output
Line R/ Mon
Return
Line R