Creating Profiles; Deleting Profiles; Renaming Profiles - Solid State Logic Matrix 2 Owner's Manual

Creating Profiles

To create a new Profile, press
Select the Profile which you wish to use as a starting point and press Copy. Type a name for the new Profile into the
Profile pop-up which appears, and press OK:
After a moment, the new Profile will appear in the Profile list in the
protocol of a Profile (HUI, MCU or CC) is not forgotten when it is not present in the Profile name, the selected Profile's protocol
is indicated at the bottom of the pop-up, as well as underneath the
DAW tab.
Press OK to exit the Profile
You can now select the new Profile using the layer selection and Profile selection functions described on the previous pages.
There is a second way to create your own Profile, using the
half of the DAW tab:
First select the Profile you want to use as a starting point and assign it to a layer, as described on the previous pages.
Press the Save As button below the
Profile into the pop-up and press OK. After a moment, the new Profile will be created and become active in that layer. In order
to ensure that the underlying protocol of a Profile (HUI, MCU or CC) is not forgotten when it is not present in the Profile name,
the selected Profile's protocol is indicated underneath the

Deleting Profiles

To delete a Profile, press
press Delete. Press OK
pop-up. Press OK to exit the

Renaming Profiles

To rename a Profile, press
Press Rename to bring up the
Profile's name will change in the Profile list in the
Edit Profiles to bring up the
Editor.
Edit Profiles
Edit Profile to bring up the
in the warning pop-up which appears, and after a moment the Profile will disappear from the list in the
Profile Editor.
Edit Profile to bring up the
Rename Profile
Profile
Chapter 6 - DAW and CC Configuration
Profile Editor
Profile
Selected Profile
Save As button in the
button to bring up the
Selected Profile
Profile Editor pop-up, select the Profile which you wish to delete, and
Profile Editor pop-up and select the Profile which you wish to rename.
pop-up. Type a new name for the Profile into the pop-up and press OK. The
Editor.
pop-up:
Editor. In order to ensure that the underlying
in the Profile Setup
Soft Key area which makes up the bottom
Save Profile As pop-up. Type a name for the new
in the Profile Setup
Matrix 2 Owner's Manual
Copy
area of the main
area of the main DAW tab.
97