Editing Plug-In Parameters (Parameter Mode); Selecting A Plug-In To Edit; Changing Plug-In Parameters; Comparing Your Changes - Solid State Logic AWS DELTA 916 Owner's Manual

Editing Plug-In Parameters (Parameter Mode)

S P -I
ELECTING A LUG
In Insert or Assign mode press the plug-in V-pot for the insert
you wish to edit or in Insert mode select Parameter mode by
pressing the
INSERT/PARAM
To exit from Parameter mode press the
you want to edit a different plug-in) or the
(if you want to change assignment).
C P -
HANGING LUG IN
Once you have selected a channel and a plug-in for editing, the
four V-pots and their switches control the on screen
parameters derived from the DAW plug-in. The names of the
currently selected controls and their values are shown above
the on-screen V-pots.
The and
PAGE UP PAGE DOWN
access all the plug-in controls.
H -R P
I ESOLUTION ARAMETER
Holding down the
OPTION
value at the top of the Plug-In Editor display.:
The ALT button can be used to open or close the plug-in/pop-up window at any time.
C Y C
OMPARING OUR
Pressing the
COMPARE
before editing.
As soon as you change any parameter the
Pressing the
COMPARE
settings.
The plug-in window must be opened before this function becomes available.
B P -
YPASSING LUG INS
The button allows a plug-In to be toggled in/out of the signal path in
BYPASS
plug-ins can be bypassed by holding down
bypass.
The channel switch can be used to bypass all the plug-ins on a channel.
SEL
V- S
POT ENSITIVITY
The V-pots for the Plug-in Editor can be set to one of two modes: Fixed or Velocity-sensitive. In Fixed mode, turning a
knob will range through the whole list of available parameters. This makes it very quick to search through long lists.
Holding down the
ALT
In Velocity-sensitive mode the speed of scrolling is dependent upon how quickly you turn the V-pot. To toggle between
the two modes press the F5 button in the Fkys menu.
AWS elta Owner's Manual
E
N TO DIT
soft button.
PARAM
ASSIGN
P
ARAMETERS
buttons can be used to
D M
ISPLAY
button while editing a plug-in parameter will show a 9-character version of the parameter
HANGES
button allows you to compare any changes made to plug-in parameters with the values stored
COMPARE
button toggles between the settings when you starting editing parameters and the current
BYPASS
button will enable a finer resolution scroll.
soft key (if
soft key
ODE
box will turn yellow.
and pushing the V-pot that corresponds to the insert you want to
1 2 3 4
1 2 3 4
mode. In
PARAM INSERT
DAW Control
mode, individual
Page 4-21