Accessing Total Recall - Solid State Logic AWS DELTA 916 Owner's Manual

Total Recall
TOTAL RECALL
O
VERVIEW
The AWS Total Recall system uses the inboard TFT screen to give a graphical display of current and stored control settings
of all rotary controls, faders and switches on the AWS channel and centre section modules. Controls that are in different
positions from the stored values are highlighted in white (faders and rotary controls) or yellow (switches). To provide
maximum clarity rotary controls are shown as horizontal sliders and switches as boxes.
Electronically latched switches ('soft' switches) in the channel strips, such as routing, EQ, Insert, Dynamics and Cut switches,
can be reset to match the stored setup with a double-press on the fader switch.
Stored setups can be copied or swapped between channels by holding down the fader switch on the source channel then
pressing the fader switch on the destination channel. If the Copy switch is selected the source channel settings are copied
to the destination channel: if not the source and destination channel settings are swapped. See Page 6-6.
For legacy purposes, data saved as a MIDI SysEx file can also be loaded to the AWS by playing through a MIDI SysEx track.
See Page 6-9 for more details.
A T R
CCESSING OTAL ECALL
Total Recall is accessed using the TFT screen and the soft keys beneath it.The 16 boxes at the base of the screen indicate
the functions assigned to the 16 buttons in two rows of eight below the screen.The four boxes above them indicate the
functions assigned to the central four buttons in the row of six. Note that the two outside buttons are used for scrolling
left and right, where relevant.
Use the soft keys to select SSL then TR to access the main Total Recall menu.
AWS elta Owner's Manual
Page 6-1