Solid State Logic AWS DELTA 916 Owner's Manual page 233

H G
LOSSARY
Analogue Focus Mode
Bass Management
Channel V-Pot
Console Focus Button
DAW Focus Mode
Master Control Panel
Master Send V-Pot
Plug-in Editor V-Pots
Track Busses
AWS elta Owner's Manual
O T
F ERMS
Channel faders control the channel audio; channel meters show analogue input levels.
Channel Rotary Encoders control DAW parameters.
A system designed to ensure that all the bass recorded on your DAW tracks is
reproduced correctly on the monitor speakers. Put simply, bass content below the
cutoff frequency of the main monitors is combined and fed to a subwoofer, thereby
effectively extending the response of the main outputs.
The rotary controls on the channel Solos and Cuts panels.
The button on the Master Control Panel that looks like this:
It selects Analogue or DAW Focus Mode.
Channel faders control DAW fader levels. Channel meters show DAW meter levels.
Channel Rotary Encoders are available for other DAW functions such as pan or send
controls.
The panel below the screen and soft key area.
The only knob on the Master Control panel – used to cycle through available sends.
Also incorporates a 'push to flip' function used to flip send levels from the rotary
encoders to the channel faders,
The four rotary encoders below the TFT screen.
Eight console-wide mono busses that can be used as feeds to your DAW inputs, as FX
sends, or pretty much anything else you can think of.
Appendices
Appendices Page A-23