Solid State Logic AWS DELTA 916 Owner's Manual page 53

C M
HANNEL ODES
When in Analogue Focus mode, the AWS elta 948 channel strips can operate within a number of different Channel
Modes, suiting a variety of operational contexts. The two channel paths within the channel strips may control any of the
following:
1. A mono or stereo input signal, for basic tracking
2. An input signal and monitor return from the DAW, for more advanced ('in-line') recording and overdubbing
3. An input signal plus additional FX sends, for mixing sessions with complex effects configurations
4. Two independent input signals, for mixing up to 48 signals
Each channel strip is independently configurable, allowing for a number of modes to be present on the control surface at
once.
Over the following pages are more detailed introductions to each the console's operation modes. The diagrams use the
following key:
Console channel signals:
Other console signals:
External signals:
Control:
Channel V-Pot
AWS elta Owner's Manual
(Path A)
(stereo)
(mono)
Channel fader
(Path B)
(stereo)
AWS 948 Tutorial
Page 2b-3