Discard; Updating A Mix Pass - Solid State Logic AWS DELTA 916 Owner's Manual

Automation
J R
OIN AND EVISE
At any time during Mix Review, the Join key can be used to switch all channels originally in write at the last rollback point
back to write at the levels or state they were at the rollback point. This is useful, for example, when balancing a chorus
level. When you have achieved this balance, you can rollback, hit Join and the levels will punch in at the balance set before
rollback, and all channels immediately return to write.The Revise key has a similar action except that all channels in write
at the Rollback point are returned to write at their current mix position. This is useful if you have been automating a
section, but made a small mistake. Just rollback prior to the mistake, hit Revise and the channels will immediately go into
write at the current fader level, allowing you to overwrite the mistake.
Multiple Rollback memories are supported so that successive operations of Join or Revise return different sets of faders
back to the write state, if multiple Rollback operations have taken place.
To return all faders to Absolute, press
the Join or Revise keys until the
Global Rollback memory is reached, at
which point all faders return to write
either at the current position, via the
Revise function, or at the balance at the
Global Rollback point, via the Join
function.

Discard

If the system is in play or stopped following a Rollback operation with any faders or cuts in Absolute mode, Discard
clears any data made since the start of the Rollback pass and forces all channels in Absolute back to Replay. The Discard
label is only shown when there is Mix data to discard.

Updating a Mix Pass

To update a Mix Pass, select the desired Mix Pass from the list on the List Mix menu by turning the left V-pot and press
the V-pot switch. 'Updating Mix Pass' will be displayed and the selected mix will now be the reference mix.
Page 7-22
Mix Review
ROLLBACK
JOIN
Point 2
Pass 3 (Channels 7-8 in
Absolute)
Pass 4
Mix Running
ROLLBACK
Global
Rollback
Point 1
Point
Pass 1 (All Channels in
Absolute)
Pass 2 (Channels 1-6 in
Absolute)
AWS elta Operator's Manual
Time