Ntroduction; Focus Modes - Solid State Logic AWS DELTA 916 Owner's Manual

ANALOGUE OPERATIONS
I

NTRODUCTION

AWS elta consoles combine SuperAnalogue™ technology from SSL's analogue consoles with powerful DAW control.
Much of the control surface will be familiar to any recording engineer who has previously used our SL 4000 or SL/XL 9000
console ranges. Once recorded, signals can then be manipulated within the DAW via the AWS elta control surface, and
then either summed internally within the DAW or returned to the analogue domain for processing through the fader-strip
EQ sections and assignable dynamics processors, and monitored in stereo or 5.1.
The AWS elta 948's in-line architecture allows for a seamless interaction between input and DAW signals, in the vein of
SSL's classic E and G series consoles.
F M
OCUS ODES
In order to allow console controls to be used for controlling either analogue signals or an external DAW, SSL
created 'Focus modes' as a way of allowing the AWS to 'focus' on one or other domain. To switch between
modes, press the Focus switch, towards the bottom of the console centre section (shown right). The button
is lit for Analogue Focus, and unlit for DAW Focus. Focus mode can also be quickly checked by looking at the
channel meters: the bottom LEDs stay lit when the console is in Analogue Focus.
While a number of controls always retain the same role (such as analogue signal processing, routing and monitoring, or
DAW transport control), the roles of the following controls are different in each Focus mode:
Console Element
Channel faders,
plus its cuts and solos
Channel V-pots,
plus its cuts and solos
Channel
SEL switch
Channel
meters
When the console is in DAW Focus mode, analogue level control of stereo channels can be assigned to the V-pots by
pressing the CHANNEL switch, to the left of the Focus button. This allows 'In-Line'-style signal control but with the
monitor mix being created using the DAW digital mixer. Pressing the V-pot will then cause the functions of the V-pot
and fader to be swapped.
948: In In-line Channel Modes, the V-pot adjusts the level for one of the channel paths, as explained on the following
page. In Stereo mode, the V-pot becomes a balance control. The CHANNEL switch is still available for DAW control.
Channel meters can be locked to either Focus mode by entering the Function Keys' Meters menu and selecting either
DAW or Anl.
AWS elta Owner's Manual
Analogue Focus (Button lit)
Analogue signal in channel
In-line: Secondary path level; Stereo: Balance
Or DAW params (see notes below)
Assigns analogue channel to Master Section
Displays channel's analogue signal level
(see notes below)
Analogue Operations
DAW Focus (Button unlit)
DAW channel level
Available for DAW parameters or
analogue signal control (see notes below)
Highlights DAW channel, track arm or
plug-in select
Displays DAW channel level
(see notes below)
Page 3-1