Solid State Logic AWS DELTA 916 Owner's Manual page 56

AWS 948 Tutorial
M C
IXING ONFIGURATIONS
When mixing in In-line mode, the secondary channel path can be employed either as an additional send from the channel,
as the right input of a stereo signal, or as an independent additional input path, allowing up to 48 signals to be mixed on
the console. Because channels are independently configurable, additional inputs might be assigned to channels not requiring
extra sends, allowing those signals that do require the extra send to take advantage of both channel paths.
B S M
ASIC TEREO IXDOWN
Basic stereo mixdown uses the channel in Stereo mode:
Chan 1
Input:
Line In
Stereo
Left &
DAW
Line In
track
out
Right
A S M
DDITIONAL END
In the Additional Send configuration (In-line Mix mode with the in-channel RETURN switch unselected), the second
channel path can be sourced pre- or post-fader, and each of the sends can be switched between them. This allows for a
high level of flexibility of send leveling and automation. The channel's signal processing is applied to both channel paths.
The V-pot controls the additional send level and the fader the main channel contribution to the Mix and/or Record busses.
Channel 1
Input:
Line In L
DAW
track
out
Page 2b-6
Channel Path 1L
Signal
Processing
Channel Path 1R
IXING
Channel Path A
Signal
Processing
(1&2 for Stereo)
FX
Sends
FX Snds
Track Bus 1
Printed
stem
Stereo
Mix Bus
Master
FX Rtns
External processing
Mix Bus
FX Rtns
External processing
AWS elta Owner's Manual
DAW
Monitoring
Monitoring
Stereo
Master
DAW