7-4. Final checks
Check that you have all the check sheets and check again that there are no errors.
7-4-1. Final checks for the operation settings
Check again that there are no errors in the settings.
①
⑪
⑫
When switching the content in the above table to actual operation, check the settings on the Initial Setting
Tool and Charge Calculation Tool.
Check that there are no errors in the settings for actual operation.
Content to be checked on the Initial Setting Tool
① - ⑥ : [Billing Function Settings] > [Billing Function Settings] screen
⑦ - ⑩ : [Billing Function Settings] > [Charges Settings] screen
Content to be checked on the Charge Calculation Tool
⑪ - ㉒ : [Advanced Settings] screen
7-4-2. Final report
Check that there are no problems with the settings or with the billing function trial run checks, and then present
all the check sheets to the customer.
WT07442X02
②
③
④
⑬
⑭
⑮
㉒
⑤
⑥
⑯
⑰
114
⑦
⑧
⑨
⑩
⑱
⑲
⑳
㉑