Mitsubishi Electric AE-200A Instruction Book page 44

The setting methods and the information displayed in the graphs differ depending on whether or not a "Charge"
license is registered.
The differences are shown below.
Energy Use Status
Ranking
Target value settings
Energy management list
Measurement
setting
Apportioning
mode setting
Setting
method
Electricity meter
setting
Standby electric
energy setting
*1 The Integrated Centralized Control Web displays the integrated value of the target values set in AE-200/AE-50/EW-50. The target values
cannot be set.
WT07442X02
"Charge" license registered
The following electric energy data are included.
• Outdoor unit operating electric energy
• Outdoor unit standby electric energy
• Indoor unit operating electric energy
• Indoor unit standby electric energy
Sets the total target value of electric energy
*1
consumption for outdoor and indoor units.
Electric energy consumption for each energy
management block or metering device per
month can be displayed.
Set a measurement unit of the pulse weight on the [Function1] > [Measurement] screen on
the LCD. (The setting can also be made on the Initial Setting Tool or the Web Browser for
Initial Settings.)
Set an apportioning mode on the [Billing
Function Settings] > [Billing Function Settings]
screen on the Initial Setting Tool.
Note
• The settings on the energy management
settings screen on the LCD or the Web
Browser for Initial Settings will be ineffective.
On the Initial Setting Tool, select a connected
indoor unit and outdoor unit for each
measurement pulse input or PI controller CH
(Channel) number.
Note
• The settings on the energy management
settings screen on the LCD or the Web
Browser for Initial Settings will be ineffective.
On the Initial Setting Tool, you can choose
whether to include standby electric energy in
the operating electric energy. The value of the
standby electric energy can also be changed.
The following electric energy data are
included.
• Outdoor unit operating electric energy
• Outdoor unit standby electric energy
Sets the target value of electric energy
consumption for outdoor units.
Cannot be displayed.
On the [Function1] > [Energy Management]
screen on the LCD, select one of the
following indoor unit apportioning modes;
[Capacity save amount], [Thermo-ON
time], and [Fan operation time].
(The setting can also be made on the Web
Browser for Initial Settings.)
On the [Function1] > [Energy Management]
screen on the LCD, select an electricity
meter that measures the electric energy
consumption of the outdoor unit to which a
given indoor unit is connected.
(The setting can also be made on the Web
Browser for Initial Settings.)
Cannot be set.
44
"Charge" license not registered