Making The Settings For The Charge Calculation Tool - Mitsubishi Electric AE-200A Instruction Book

3-3-2. Making the settings for the Charge Calculation Tool

Refer to section 5-1 "Installation procedures of the Charge Calculation Tool" for how to install the Charge
Calculation Tool.
Procedures
1. Start up the Charge Calculation Tool.
2. Select [Advanced Settings].
3. Enter the password.
Note
• The "Password first-input window" will appear for the initial setting. Enter the password you wish to use
twice. (Make a note of your password so as not to forget it.)
• If you forget your password, contact your dealer.
• To change your password, click [Change password] on the top right of the Advanced Settings screen.
When the "Password change window" opens, enter your current password and then enter the new
password.
• Your password must consist of at least 8 characters and no more than 20 characters.
(The following characters cannot be used: <, >, &, ", or ')
Password first-input window
4. Make the "Automatic output settings" in the Advanced Settings screen.
Refer to section 3-3-3 "Settings on the Charge Calculation Tool" for details on how to make the settings.
5. Click [OK] (the changes will be applied).
WT07442X02
Password change window
26
Enter the
password.