8-3. Replacing the AE-200
When replacing the AE-200, the stored apportioned data needs to be restored.
This section describes how to restore the apportioned data (backup) from the AE-50/EW-50 onto the AE-200.
AE-200
Apportioned
data
If the AE-200 fails,
the apportioned
data will also be
deleted.
1. Make the network settings for the AE-200.
2. Make the normal initial settings on the AE-200.
3. Carry out the data restore procedure.
On the AE-200's LCD, touch [Maintenance] > [Apportioned data] > [Restore], select [AE200] as the
"Centralized controller" and then touch [Restore].
Note
• Be sure to select [AE200].
If you inadvertently select AE-50/EW-50, the apportioned calculation results data will all be deleted.
WT07442X02
AE-50/EW-50
Replacing the AE-200
Apportioned
data
AE-50/EW-50
The AE-50/EW-50
restores the
apportioned data.
Apportioned
data
119
AE-50/EW-50
Replaced AE-200
Apportioned
Empty
AE-50/EW-50
Apportioned
data
data