Mitsubishi Electric AE-200A Instruction Book page 57

9. Touch [Save Settings].
10. Touch [Initial Settings] > [Network].
11. Switch the [Controller] setting between [Exp1] through [Exp4] to set the destination IP address in "LAN
Settings" for each controller individually, and touch [Save Settings].
12. Touch [Initial Settings] > [License].
13. Switch the [Controller] setting between [Exp1]
through [Exp4] to register licenses for each
controller individually, referring to steps 3 and 4
above.
Note
• "Charge" license is required for each AE-200/AE-50/EW-50.
• To use an electricity charge apportioning function of TG-2000A, set "AE-200 Apportion" to [Do not use].
• When [Use] is selected in "AE-200 Apportion", the "AE-200 M-NET" setting will automatically be [Do not
use] even if [Use] is set.
WT07442X02
57