Block Settings - Mitsubishi Electric AE-200A Instruction Book

6-6-4. Block settings

By making block settings, multiple groups in a given block can be collectively monitored or operated on the
AE-200's LCD and the Integrated Centralized Control Web.
Procedures
1. Click [Unit Settings] > [Blocks] to access the block settings screen.
Target centralized
controller
Select one of the connected
centralized controllers
whose block settings are to
be made.
Block No.
Block name
2. In "Block Name", enter the block name in 20 characters or less.
The name entered here will be displayed on the LCD and the Integrated Centralized Control Web.
3. Click the icon in "Group registration" (
4. Select the group numbers to be registered, and click [OK].
(To show the group name, move the cursor to the group number.)
5. Click [Save] to save the settings.
WT07442X02
Save
Click to save the settings.
) to display the group selection screen.
78
Group registration
Click to display the screen
for selecting groups.
Back
Click to display the previous
settings without making any
changes.