Mitsubishi Electric AE-200A Instruction Book page 38

Hide thumbs Also See for AE-200A:
Table of Contents

Advertisement

Note
• If you want to display in order of names, it is recommended that you add a number or alphabetic letter at
the beginning of the energy management block (tenant) names so that they appear in the desired order.
2) Merger of energy management blocks with same name
Procedures
1. Select [Merge] or [Not merge].
When multiple AE-200 units are connected and you want to merge the energy management blocks with the
same name on each AE-200 and output merged totals for the charge calculation results or charge rates,
select [Merge].
When multiple AE-200 units are used for the same tenant
When multiple AE-200 units are used for the same tenant, you can merge the charge calculation results or
the charge rate by setting the same energy management block name on the Charge Calculation Tool for
each AE-200.
AE-200
EW-50
① If the energy management blocks (tenants) are same, set the same name.
② On the [Unit Settings] > [Energy management block settings] screen, set "Merge" for the energy
management blocks (tenants) with same name.
Display order: Number
Display order: Name
WT07442X02
Energy management block
Operation block
Group
Group
Operation block
Group
The output order for each AE-200 will be in order of the AE-200 IP addresses.
The output order within each AE-200 will be in order of the energy management
Merge
block numbers registered on the Initial Setting Tool.
The energy management blocks will be merged in order of AE-200 numbers.
The output order for each AE-200 will be in order of the AE-200 IP addresses.
Not merge
The output order within each AE-200 will be in order of the energy management
block numbers registered on the Initial Setting Tool.
Will be output in order of energy management block names.
Merge
The energy management blocks will be merged in order of AE-200 numbers.
The output order for each AE-200 will be in order of the AE-200 IP addresses.
Not merge
The output order within each AE-200 will be in order of energy management block
names.
Set the same names.
AE-200
EW-50
38
Energy management block
Operation block
Group
Group
Operation block
Group

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ae-50aEw-50aae-200eEw-50eAe-50e

Table of Contents