Preparation Of The Software (Installation); Installation Procedures Of The Charge Calculation Tool - Mitsubishi Electric AE-200A Instruction Book

5. Preparation of the software (installation)

5-1. Installation procedures of the Charge Calculation Tool

Important
• If your OS is Windows 7, check beforehand that .NET Framework version 4.5.2 or later is installed.
Refer to section 5-4 "Installation procedures of .NET Framework". If the system is not connected to the
Internet, you will need to download the offline installer beforehand.
Note
• The installed version of .NET Framework can be checked by selecting the Windows Start menu and then
choosing Control Panel > Program and Features.
• To upgrade the version of Charge Calculation Tool, perform the following installation procedure.
Procedures
1. Execute the setup file of Charge Calculation Tool.
Note
• The setup file is "setupCCToolA_V***.msi" for AE-200A/AE-50A/EW-50A.
The setup file is "setupCCToolE_V***.msi" for AE-200E/AE-50E/EW-50E.
("V***" indicates version number. "V110" indicates Ver. 1.10.)
2. If the "Security Warning" message appears, click [Run].
3. When the "Setup Wizard" screen appears, click [Next].
4. The "License Agreement" screen will appear. Select [I Agree] and
click [Next].
5. The "Select Installation Folder" screen will appear. Select the save
destination folder and click [Next].
Note
• To allow all users who can login the PC to have access to the
Charge Calculation Tool, check that the [Everyone] checkbox is
selected and then click [Next].
WT07442X02
45