Making The Settings For The Charge Calculation Tool - Mitsubishi Electric AE-200A Instruction Book

Hide thumbs Also See for AE-200A:
Table of Contents

Advertisement

3-2-3. Making the settings for the Charge Calculation Tool

Refer to section 5-1 "Installation procedures of the Charge Calculation Tool" for how to install the Charge
Calculation Tool.
[1] Systems where electric energy is metered (with-metering-device method)
Procedures
1. Start up the Charge Calculation Tool.
2. Select [Charge Calculation].
Note
• Refer to section 4-1-2 "Charge Calculation Tool settings" for "Metering device connection" settings.
3. In "Time period for calculation", enter the start date and end date for the time period for which you want to
calculate the charges in the respective input fields. (Format: YYYY/MM/DD)
Note
• The Charge Calculation Tool can calculate charges within the date range of the CSV data (apportioned
results) output from the AE-200.
For example, if the CSV data (apportioned results) acquired on the LCD runs from April 1, 2015 to April 30,
2015, the Charge Calculation Tool cannot calculate charges for CSV data outside that range (e.g. March
20, 2015 to April 19, 2015). Consequently, it is recommended that you specify the maximum date range (the
previous 62 days) for CSV data (apportioned results) output.
• Refer to section 4-2 "Calculating the charges for 2 months ago or earlier" to calculate charges for data
more than 62 days (2 months) previously.
4. Select [From CSV file] as the apportioned data acquisition method in the charge calculation screen.
5. Click [Browse] for the CSV file (air-conditioner data), select the "Energy management block" data file for the
CSV data (apportioned results) acquired from the AE-200 and then click [Open].
• The file names for CSV data (apportioned results) are as shown below.
■Energy management block
• 1-day intervals: "App"_"IC"_D_[start year]-[start month]-[start day]_[end year]-[end month]-[end day].csv
■Metering device
• 1-day intervals: "App"_"MC"_D_[start year]-[start month]-[start day]_[end year]-[end month]-[end day].csv
Example: For data at 1-day intervals with a target period of March 1, 2015 to April 30, 2015
Energy management block data: App_IC_D_2015-03-01_2015-04-30.csv
Metering device data: App_MC_D_2015-03-01_2015-04-30.csv
WT07442X02
Displayed when the "Metering device connection" setting
is "Connected".
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ae-50aEw-50aae-200eEw-50eAe-50e

Table of Contents