Table of Contents
Advertisement
Instructions for Use
Set up
Place the Refractix on a clean, solid surface in an
1
environment where the temperature is stable.
Attach the appropriate country-specific plug adapter
2
to the AC adapter. Insert one end of the USB-C
Charging Cable into the AC Adapter and the other
end into the back of the Refractix.
Plug the AC Adapter into an AC wall outlet.
3
Allow time for the battery to charge.
Multi-function Buttons
Refractix can be operated using either the touchscreen
or the three physical buttons below the display. Each
physical button performs the same action as the
touchscreen button directly above it.
Allow the device time to reach room temperature.
4
This may take up to 30 minutes depending on the
temperature difference between room ambient
temperature and device temperature.
CAUTION: Keep the device away from heat or air
conditioning vents, which can cause drafts and affect
the temperature stability.
Power On/Off
To power on, press any button.
To power off, press and
hold the center button for
three seconds. After
five minutes of inactivity
(or one hour when
powered by USB),
the device will
automatically
power off.
13910000-101 Rev. A • 11
Advertisement
Table of Contents
