Selecting The Handpiece And Contra-Angle Handpiece - KaVo INTRAsurg 300 Instructions For Use Manual

Instructions for use INTRAsurg 300 / INTRAsurg 300 plus
5 Operation | 5.3 Free use
W
Z
Y
Note
The pump can only be turned on and off with the left button on the multi-functional
for control. Display when the pump is turned off ⑤: 0
To save the pump at OFF (0), press the button on the multifunctional foot control
and save it with the enter button. The previously set flow is retained. If you can turn
it on again by pressing the left button on the multi-functional foot control and save
it with the enter button.

5.3.5 Selecting the handpiece and contra-angle handpiece

▶ Press the parameter button until the asterisk flashes at the transfer ratio ③.
Use the Plus and Minus buttons to scroll through the specified table of transfer ratios
③ of the instruments in the parameter menu. Always check the selection in the
display.
Note
The maximum permissible speed and torque of the selected handpieces and con‐
tra-angle handpieces are displayed.
32/66