Controls - KaVo INTRAsurg 300 Instructions For Use Manual

Instructions for use INTRAsurg 300 / INTRAsurg 300 plus
3 Product description | 3.2 Controls
PRG
Para-
me ter

3.2 Controls

A Program button
B Parameter button
C Minus button
D Plus button
E Enter button
Open the program. Use the PRG button to open the steps; repress the button to
switch to free use.
Open setting mode. And Use the parameter button to select changeable parame‐
ters. Press the parameter button until the asterisk (*) flashes at the desired position.
Changeable parameters:
- max. torque
- max. speed
- coolant pump setting
- Transfer ratio of the handpiece and contra-angle handpiece
- Direction of motor rotation
Reduce * value.
Increase * value.
Enter button:
Save set of values/leave setting mode
INTRAsurg 300 Plus: Request maximum torque.
① Step (1... 6)
② Transfer ratio of the handpiece and
contra-angle handpiece
③ Speed (rpm)
④ Direction of rotation (< - / - >)
⑤ Coolant pump setting (1... 6)
⑥ Maximum torque (Ncm)
14/66