Operation; Operation In General; Start Up; Surgical Motors - KaVo INTRAsurg 300 Instructions For Use Manual

Instructions for use INTRAsurg 300 / INTRAsurg 300 plus
5 Operation | 5.1 Operation in general

5 Operation

5.1 Operation in general

5.1.1 Start up

CAUTION
Product damage from incorrectly adjusting the tension.
Destruction of electrical components.
▶ Adjust the voltage input for the product to the existing mains voltage.
▶ Switch on the device.
An acoustic signal confirms that the device is turned on.
The device runs a self test.
The firmware version and note "Please check parameters" is briefly shown on
the display.
▶ Note the displays.
If the device is not monitored, we recommend turning it off for safety reasons and
to save energy.
Note
The last saved values are displayed.

5.2 Surgical motors

CAUTION
Incorrectly set parameters
Damage from incorrect input values
▶ Check all input values before use.
Note
Following instructions for use, service instructions and installation instructions in
the motor, handpiece and contra-angle handpiece packaging.

5.2.1 INTRA S 550 surgical motor

▶ Plug straight or contra-angle handpiece onto the motor coupling.
▶ Check secure seat before each treatment.
25/66