Light Functions - KaVo INTRAsurg 300 Instructions For Use Manual

Instructions for use INTRAsurg 300 / INTRAsurg 300 plus
5 Operation | 5.5 Functions exclusively with the 300 plus program version

5.5.2 Light functions

Place the INTRA CL light, hand and contra-angle handpiece on the INTRA LUX SL
550 motor and turn it until the catch audibly locks in place. The INTRA CL light, hand
and contra-angle handpiece is recognised and the corresponding parameters ap‐
pear on the display (this function is only possible with the INTRA CL light, hand and
contra-angle handpiece).
Light on/off without motor and pump running (spot)
▶ Move the shift pedal to the right.
The light only shines when actuated (spotlight function).
Default light when the motor starts
▶ Move the shift pedal to the left.
The light is turned on or off. When the light is turned on, the following appears
in the display: LUX (this function is only possible with INTRA CL light, handpieces
and contra-angle handpieces).
Note
If there is no light function, check if the light is turned on and if the INTRA CL light,
hand and contra-angle handpiece is properly mounted.
Afterglow time
The light shines for 3 sec. after the motor stops running.
42/66