Table of Contents
Advertisement
Operation
▶
After the cutter or grinder has stopped rotating, turn the grip sleeve all
the way in the direction of the arrow, and remove the cutter or grinder.
▶
Turn the grip sleeve back into its initial position.
5.5 Conversion for short handpiece cutters or grinders
Note
The handpiece must be converted when short cutters or grinders are used.
▶
Open the handpiece chuck.
▶
Insert the accompanying drill stop into the chuck.
▶
Insert the handpiece cutter or grinder, and push it in all the way.
33
Advertisement
Table of Contents
