Clutch Related Parts Inspection - Suzuki LT-A400 Service Manual

5A-21 Automatic Transmission:
• Fit the bearing retainers.
• Apply a small quantity of thread lock to the bearing
retainer screws, and tighten them securely.
: Thread lock cement 99000–32030
(THREAD LOCK CEMENT SUPER 1303 or
equivalent)
• Apply grease to the O-ring and oil seal lip.
• Install the collar (1).
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
CAUTION
!
Replace the O-ring with a new one.
1
• After installing the clutch wheel, check that the clutch
wheel rotates smoothly.

Clutch Related Parts Inspection

Refer to "V-belt Inner Cover Disassembly and Assembly
(Page 5A-19)".
Clutch Shoe
Inspect the boss and centrifugal weight fulcrum sections
for looseness, damage and operation.
Inspect the clutch shoe for damage and fouling with oil
on the surface.
If any defects are found, replace the clutch shoe
assembly with a new one.
I827H1510074-01
Check the depth of the grooves on the clutch shoes. If
there is no groove at any part of the shoes, replace the
clutch shoes.
Clutch shoe thickness "a"
Service limit: No groove at any part
I827H1510075-01
I827H1510076-01
B827H15106013
I831G1510084-01
" a "
I827H1510077-01