Front Suspension Upper / Lower Arm Bushing Removal And Installation - Suzuki LT-A400 Service Manual

2B-11 Front Suspension:
Installation
1) Install the knuckle end with the special tool.
Special tool
(A): 09913–70210 (Bearing installer set)
2) Install the snap ring (1) with the special tool.
CAUTION
!
Replace the snap ring (1) with a new one.
Special tool
: 09900–06107 (Snap ring pliers)
1
3) Install the suspension arm. Refer to "Front
Suspension Upper / Lower Arm Removal and
Installation (Page 2B-8)".
Front Suspension Upper / Lower Arm Bushing
Removal and Installation
Refer to "Front Suspension Upper / Lower Arm Removal
and Installation (Page 2B-8)".
Removal
Remove the front suspension arm bushing using a
hydraulic press and suitable tools.
(A)
I827H1220030-01
Installation
Install the front suspension arm bushing using a
hydraulic press and suitable tools.
!
The removed bushing must be replaced with
a new one.
I827H1220031-01
CAUTION
B827H12206014
I827H1220043-02
I827H1220044-02