Muffler / Exhaust Pipe Removal And Installation - Suzuki LT-A400 Service Manual

Muffler / Exhaust Pipe Removal and Installation

Removal
1) Remove the right inner fender. Refer to "Exterior
Parts Removal and Installation in Section 9D
(Page 9D-3)".
2) Remove the rear fender. Refer to "Exterior Parts
Removal and Installation in Section 9D (Page 9D-
3)".
3) Loosen the muffler connecting bolt (1).
4) Remove the muffler (2).
NOTE
Support the muffler to prevent it from falling.
2
B827H11B06002
1
I827H11B0001-01
I827H11B0002-01
5) Remove the exhaust pipe (3).
NOTE
Support the exhaust pipe to prevent it from
falling.
3
Installation
Install the exhaust pipe/muffler in the reverse order of
removal.
Pay attention to the following points:
• Install new exhaust pipe gasket (1) and connector (2).
CAUTION
!
Replace the removed gasket and connector
with new ones.
1
Exhaust System: 1K-2
I827H11B0003-01
I827H11B0004-01
2
I827H11B0005-01