1D-36 Engine Mechanical:
Automatic Transmission
Remove the automatic transmission component parts
(1). Refer to "V-belt Type Continuously Variable
Automatic Transmission Removal and Installation in
Section 5A (Page 5A-7)". and "Clutch Shoe Removal
and Installation in Section 5A (Page 5A-16)".
1
Gear Position Switch
1) Remove the gear position switch (1).
2) Remove the switch contacts and springs.
Cam Chain
• Remove the cam chain (1).
I827H1140106-01
1
I827H1140107-01
1
I827H1140108-01
Oil Pump
1) Remove the oil pump drive gear bolt with holding the
oil pump driven gear (1) using the special tool.
2) Remove the washer (2) and oil pump drive gear (3)
from the oil pump.
Special tool
(A): 09930–40113 (Rotor holder)
(A)
3) Remove the pin (4).
4) Remove the snap ring (5).
Special tool
: 09900–06107 (Snap ring pliers)
5) Remove the oil pump driven gear (1).
4
5
6) Remove the pin (6) and washer (7).
7) Remove the oil pump (8).
7
8
6
8) Remove the dowel pins.
2
3
1
I827H1140109-01
1
I827H1140110-01
I827H1140111-01