Exhaust Pipe / Muffler Removal And Installation - Suzuki kq750 2008 Service Manual

Exhaust Pipe / Muffler Removal and Installation

Removal
1) Remove the inner fenders and side covers, left and
right. Refer to "Front Side Exterior Parts Removal
and Installation in Section 9D (Page 9D-6)".
2) Remove the rear carrier. Refer to "Rear Carrier
Removal and Installation in Section 9E (Page 9E-5)".
3) Remove the seat. Refer to "Seat Removal and
Installation in Section 9D (Page 9D-11)".
4) Remove the engine side cover and rear fender.
Refer to "Rear Side Exterior Parts Removal and
Installation in Section 9D (Page 9D-9)".
5) Loosen the muffler connecting bolt (1).
6) Remove the exhaust pipe (2).
NOTE
Support the exhaust pipe to prevent it from
falling.
B831G21B06002
1
I831G11B0002-02
2
I831G11B0003-01
7) Remove the muffler (3).
NOTE
Support the muffler to prevent it from falling.
3
8) Remove the muffler cover (4).
4
Installation
Install the exhaust pipe/muffler in the reverse order of
removal.
Pay attention to the following points:
• Tighten the muffler mounting bolts (1) to the specified
torque.
Tightening torque
Muffler mounting bolt (a): 23 N·m (2.3 kgf-m, 16.5
lb-ft)
1
(a)
Exhaust System: 1K-2
I831G11B0004-03
I831G11B0005-02
1
(a)
I831G11B0006-03