Installing The Virtual Ip Cards To The Pbx; Installing Additional Activation Keys - Panasonic KX-NS1000 Installation Manual

Note
If an external DHCP server is in use, do not enable the DHCP Server feature. Doing so may allocate
inappropriate IP addressing information to the devices.

5.4.3 Installing the Virtual IP Cards to the PBX

5.4.4 Installing Additional Activation Keys

The corresponding number of IP trunks, IP telephones or enhanced features can be activated by installing the
downloaded activation key file(s) using Web Maintenance Console.
Installing the Activation Key Files
Be sure to connect the PC to the PBX in advance. For details about Web Maintenance Console, refer to
"5.3 Starting Web Maintenance Console".
1.
Log in to Web Maintenance Console using the Installer level account.
2. Click Maintenance ® Utility ® Activation Key Installation.
Activation Key Installation window will be displayed.
3.
Click Browse and specify the directory where the activation key files are stored, and click Open.
4.
A list of activation key files stored in the specified directory is displayed. Check the boxes next to the
activation keys to install to the PBX, and click Install.
5.4.4 Installing Additional Activation Keys
Click Setup ® Network Service ® Server Feature ®
1.
DHCP.
2. On the DHCP Server tab, select Enable for DHCP
Server.
3. Enter valid settings for the IP address auto
assignment.
Note
For details about IP address auto assignment
settings, refer to "28.2.1 Network Service—[2-1]
Server Feature—DHCP" in the PC Programming
Manual.
4. Click OK.
1. a. Click Setup ® PBX Configuration ®
Configuration ® Slot.
b.
Click Virtual.
2. a.
Click on the name of the desired virtual card tab.
b.
From the Total number of cards drop-down list,
select the desired number of cards.
3. A confirmation message will be displayed. Click OK.
Installation Manual 227