5.8.1 Assigning IP Addressing Information
KX-NT300 series (except KX-NT321) and KX-NT500 series (except KX-NT551)
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
To set the subnet mask address
Select "Subnet Mask".
To set the default gateway address
Select "Default Gateway".
To enter the IP address of the PBX
Return to the
Continued on next page
Press "SETUP" when it is displayed.
for DHCP setting.
For KX-NT300 series: Software version 2.00 or later only
For KX-NT500 series: Software version 1.00 or later only
PBX IP Address
Select "IP Address".
Subnet Mask Address*
Default Gateway Address*
Select "PBX IP