Panasonic KX-NS1000 Installation Manual page 299

Pure ip-pbx
Hide thumbs Also See for KX-NS1000:
Table of Contents

Advertisement

Application
FTP
*1
The port number ranges must be within the range of RTP/RTCP for NAT traversal (16000–18047).
Up to 4 IP addresses can be assigned to the KX-NS1000's optional DSP cards. The following example shows the port number ranges
set for each IP address:
[Example]
Port forward destination
DSP#1–1
DSP#1–2
DSP#2–1
DSP#2–2
For the KX-UT series:
Application
SIP Proxy
CWMP
HTTP
HTTPS
SIP-MLT Data
HTTP
5.9.4 Installing IP Phones at a Remote Site with a Built-in Media Relay Gateway
LAN Side Port Number
The port number used for the FTP
protocol. This is used for software
updates.
LAN Side Port Number
UDP Port No. for SIP Extension
Server
(refer to PC Programming Manual
"9.5.1 PBX Configuration—[1-1]
Configuration—Slot—Site
Property—Main—Port Number")
CWMP (HTTP) Port No. for
SIP-MLT
(Use the same value as in step 11 of
"Programming the KX-NS1000 with
Built-in Media Relay Gateway".)
CWMP (HTTPS) Port No. for
SIP-MLT
(Use the same value as in step 11 of
"Programming the KX-NS1000 with
Built-in Media Relay Gateway".)
Data Transmission Protocol
(HTTP) Port No. for SIP-MLT
(Use the same value as in step 11 of
"Programming the KX-NS1000 with
Built-in Media Relay Gateway".)
WAN Side Port Number
NAT - FTP Server Port No.
(Use the same value as in step 5 of
"Programming the KX-NS1000 with
Built-in Media Relay Gateway".)
Port number range
16000–16511
16512–17023
17024–17535
17536–18047
WAN Side Port Number
NAT-SIP Proxy Port No.
(Use the same value as NAT - SIP
Proxy Server Port No. in step 5 of
"Programming the KX-NS1000 with
Built-in Media Relay Gateway")
NAT - CWMP Server (HTTP) Port
No.
(Use the same value as in step 5 of
"Programming the KX-NS1000 with
Built-in Media Relay Gateway".)
NAT - CWMP Server (HTTPS) Port
No.
(Use the same value as in step 5 of
"Programming the KX-NS1000 with
Built-in Media Relay Gateway".)
NAT - SIP-MLT Data Download
Server (HTTP) Port No.
(Use the same value as in step 5 of
"Programming the KX-NS1000 with
Built-in Media Relay Gateway".)
Installation Manual
299

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents