5.9.1 Registering IP Telephones
For Non-KX-UT Series SIP Phones
After connecting non-KX-UT series SIP phones to the PBX over a network, register those IP terminals to the
Follow the procedure below for registration.
Click Setup ® PBX Configuration ®
Configuration ® Slot.
Click Virtual ® V-SIPEXT32.
Move the mouse pointer over the V-SIPEXT32 card
(Virtual 32-Channel SIP Extension Card).
A menu will be shown under the mouse pointer.
Click Port Property.
Assign extension numbers to the SIP extensions.
If the Automatic Extension Number Set for Extension
Card feature is enabled, the extension numbers of
SIP extension are automatically assigned. To
programme this feature, refer to "9.32 PBX
New Card Installation—Automatic Extension
Number Set for Extension Card" in the PC
If not, enter the extension number for each SIP