Panasonic KX-NS1000 Installation Manual page 236

Pure ip-pbx
Hide thumbs Also See for KX-NS1000:
Table of Contents

Advertisement

5.6.3 Programming the Network Settings
236
Installation Manual
Confirm that all V-IPGW16 cards are set to OUS.
Note
When a V-IPGW16 card is installed, 8 ports are
available for the card.
2.
a.
Click Setup ® PBX Configuration ® CO &
Incoming Call.
b.
Click CO Line Settings.
c.
Type the CO Name and assign an unused Trunk
Group Number to be used for all IP trunks.
d.
Click OK.
3.
Note
Before changing Numbering Plan settings, when a
V-SIPEXT32 card or V-UTEXT32 card is installed,
change the status of the card(s) to OUS.
a.
Click Setup ® PBX Configuration ® System.
b.
Click Numbering Plan.
c.
Click Main.
d.
Click the Other PBX Extension tab.
e.
In the Dial (3 digits) cell, type a starting digit of
destination extension.
f.
Click OK.
Click Setup ® PBX Configuration ® Private
4.
a.
Network.
b.
Click TIE Table.
c.
In the Leading Number cell, type the starting digit
of destination extension.
d.
Click OK.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents