8.6.24 VPN—VPSS Setting
The VPSS information path refers to the information path that makes VPSS possible. Information is encrypted
with SSL, IPsec, etc., and exchanged securely.
Slave Site 1
VPN Simple Settings can be activated in the Easy Setup Wizard.
For details, refer to "5.4.1 Easy Setup Wizard" in the Installation Manual.
The following settings relating to VPSS can be changed manually.
KX-NSN216 (16-channel IPsec Activation Key) is required to use this feature.
To connect PBXs over a VPN, the Master unit and backup Master unit must both have static IP addresses.
Users cannot use the VPSS function when more than one KX-NS1000 is on the same local network. In
this type of configuration, the user must perform custom settings in whole or in part for a VPN connection.
Local address subnets on the LAN side that overlap are not detected by VPSS.
Specify a site number, and you can change whether VPSS is
enabled or disabled, the Slave unit's name, and other detailed
Slave Site 2