5.3 Starting Web Maintenance Console
To import system data from a VPS
Connect a PC to the VPS, and then start the VPS's Maintenance Console.
For details about connecting a PC to the VPS or about the Maintenance Console, refer to the VPS's
In Maintenance Console, back up the system data on the VPS to the PC.
The file name of the backup will be similar to:
For details about backing up, refer to the documentation of the VPS.
Start the PBX's Off-line Web Maintenance Console.
To import the VPS data into an existing PBX's system data, save the PBX's system data beforehand. For
details, refer to "7.2.2 Utility—File—File Transfer PBX to PC" in the PC Programming Manual.
Log in using the Installer level account.
Navigate to Maintenance ® Tool ® Import ® VM System Data.
In Select a Destination UM-Group No., select the UM-group number.
In TVM database file, select the system data file name to import.
Select the data to import.
Custom Service Settings
Call Routing—Caller-ID Mode Settings
Call Routing—PIN Mode Settings
The data will be imported into the PBX's system data. The start and end time of the import as well as the
import results will be displayed on the report. You can save this to the local PC.
Save the PBX system data with the imported VPS system data to the PC so it can be transferred to a PBX.
For details about transferring the file to the PBX, refer to "7.2.1 Utility—File—File Transfer PC to PBX" in
the PC Programming Manual.