Starting Web Maintenance Console - Panasonic KX-NS1000 Installation Manual

5.3 Starting Web Maintenance Console

System Requirements
For the system requirements of the PC (operating system, hardware specifications, supported browsers, etc.),
refer to "1.2.1 Starting Web Maintenance Console" in the PC Programming Manual.
Copyright for MD5
This software uses the Source Code of RSA Data Security, Inc. described in the RFC1321 (MD5
Message-Digest Algorithm).
Copyright (C) 1991-2, RSA Data Security, Inc. Created 1991. All rights reserved.
Licence to copy and use this software is granted provided that it is identified as the "RSA Data Security, Inc.
MD5 Message-Digest Algorithm" in all material mentioning or referencing this software or this function.
Licence is also granted to make and use derivative works provided that such works are identified as "derived
from the RSA Data Security, Inc. MD5 Message-Digest Algorithm" in all material mentioning or referencing the
derived work.
RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or
the suitability of this software for any particular purpose. It is provided "as is" without express or implied warranty
of any kind.
These notices must be retained in any copies of any part of this documentation and/or software.
Password Security
CAUTION
To the Administrator or Installer regarding the system password
1.
Please provide all system passwords to the customer.
2.
To avoid unauthorised access and possible abuse of the PBX, keep the passwords secret, and inform
the customer of the importance of the passwords, and the possible dangers if they become known to
others.
3.
The PBX has default passwords preset. For security, change these passwords the first time that you
programme the PBX.
4.
Change the passwords periodically.
5.
It is strongly recommended that passwords of 10 numbers or characters be used for maximum
protection against unauthorised access. For a list of numbers and characters that can be used in system
passwords, refer to "1.1.3 Entering Characters" in the PC Programming Manual.
Connecting to Web Maintenance Console
1.
Connect the PC to the PBX:
•
Connect the PBX to a PC with the MNT port and access the PBX directly from the PC. For details, refer
to "Direct Connection" in "5.2 PC Connection".
•
Connect the PBX to a network with the LAN port and access the PBX from a PC in your LAN or VPN.
For details, refer to "Connection via LAN", "Connection via Virtual Private Network (VPN) " and
"4.11.1 LAN Connection for the Main Unit".
•
Connect the PBX to a network with the LAN port and access the PBX from a PC using an Internet
connection. For details, refer to "Connection via Internet" and "4.11.1 LAN Connection for the Main
Unit".
5.3 Starting Web Maintenance Console
Installation Manual 201