Installing The Virtual Ip Cards To The Pbx; Installing Additional Activation Keys - Panasonic KX-NS500 Getting Started

4.1.3 Installing Additional Activation Keys

4.1.2 Installing the Virtual IP Cards to the PBX

4.1.3 Installing Additional Activation Keys
When the number of preinstalled activation keys is not enough for the desired configuration or when you wish
to use enhanced features, additional activation keys in the form of activation key files can be installed using
Web Maintenance Console.
Activation Key Code and Key Management System
To obtain additional activation keys, you need to purchase the appropriate activation key codes and access
the Key Management System. You can download the activation keys as an activation key file from the Key
Management System. To download the activation keys, enter the MPR ID number shown on the back of the
main unit, and activation key number and registration ID provided on each activation key code.
Note
For information about the types of activation keys, refer to "3.1 Information about the Activation Keys" in
the Installation Manual.
Installing the Activation Key Files
1.
Log in to Web Maintenance Console using the Installer level account.
2. Click Maintenance ® Utility ® Activation Key Installation.
Activation Key Installation window will be displayed.
3.
Click Browse and specify the directory where the activation key files are stored, and click Open.
4.
A list of activation key files stored in the specified directory is displayed. Check the boxes next to the
activation keys to install to the PBX, and click Install.
5.
When installation is complete, the message, "The activation key has been installed and activated
successfully!" is displayed.
6.
Click OK.
Notice
The activation key file can only be installed in the PBX with the MPR ID number entered when the activation
key file was downloaded. The activation key file cannot be reissued unless the mother board crashes.
34 Getting Started
Click Setup ® PBX Configuration ® Configuration
1.
® Slot.
2. Place the mouse cursor over the Virtual Slot, and in the
menu that appears, click Select Shelf.
3. Click on the name of the virtual card to install in the list
on the right. An image of the virtual card will be displayed
to the left of the list, and information about the card will
be shown below.
4. Click and drag the image of the virtual card to the free
virtual slot it is to be installed in, and release it. The virtual
card will move into the virtual slot space.
5. Click OK to confirm.