Panasonic KX-NS1000 Installation Manual page 203

Using Web Maintenance Console in Off-line Mode
You can connect a PC to the PBX to programme the PBX using Web Maintenance Console (On-line mode),
or you can programme the PBX without connecting the PC to the PBX (Off-line mode).
Off-line mode programming is performed using the Off-line version of Web Maintenance Console, which you
install on your PC. The changes made during Off-line mode are saved as local data on the PC, and then later
uploaded to the PBX.
The following procedures outline how to install the Web Maintenance Console for Off-line mode programming.
Installation
Note
•
Be sure to install the latest version of Off-line WEB-Maintenance Console.
•
Before beginning the installation of Off-line Web Maintenance Console, the following software must be
installed on the PC:
–
Microsoft .NET Framework 2.0
–
Microsoft .NET Framework 4
This software can be downloaded from Microsoft's online Download Centre.
•
To install or uninstall the software on a PC running Windows Vista Business, Windows 7, Windows 8,
Windows 8 Professional, Windows 8.1, or Windows 8.1 Professional, you must be logged in as a user
in the "Administrators" group.
1.
Copy the Off-line WEB-Maintenance Console setup file to your PC.
2.
Double-click the setup file to run the installer.
3.
Follow the on-screen instructions provided by the installation wizard.
Note
For information about programming the PBX in Off-line mode, refer to the PC Programming Manual.
Converting KX-TDE, KX-NCP or KX-TDA100D System Data for Use with the
KX-NS1000
You can use a tool to convert an existing PBX's system data (DxSYS
Slave unit, and then use that data as the system data (DCSYS) for the KX-NS1000. The following options are
available as the conversion destination (Master unit or Slave unit) for the data.
Conversion
type
Master data
converter
Slave data
converter
The following figures illustrate the system data conversion process for the conversion types.
System data necessary for conversion
System data from an existing PBX
(DxSYS )
*1
System data from an existing PBX
(DxSYS ) that will be added as a slave unit.
*1
System data from a Master unit to be used
as the base.
5.3 Starting Web Maintenance Console
) for use in a KX-NS1000 Master unit or
*1
System configuration for
post-conversion DCSYS file
Master unit, Stand alone
Master unit with Slave units
Installation Manual 203