Alpha 6000S series User Manual page 3

Foreword







All rights reserved. The contents in this document are subject to change without notice. If
you have any questions and problems about the use of our products, please contact our
agents or us. Any improved suggestions are welcome.
2
This equipment contains dangerous voltage ,Not accord with the
warning or breach this manual operation. Electric shock can cause
serious or fatal injury. Only qualified personnel shall wire the drive.
Please cut off the power before wiring and inspecting. It is not
permissible to touch PCB or interior components before battery control
lamp goes off or until 5 minutes after the power has been removed. It is
necessary to use meters to confirm the charging capacitor has discharged
off. Otherwise, a risk of electric shock may happen.
Don't contact AC power source to the output terminals U, V, W of the
inverter. When using the inverter, the earthing terminal of the inverter
must be grounded correctly and reliably according to IEC electrical
safety regulation.
Unauthorized change of inboard wiring and using accessories, which
sold or recommended by blame manufacturer may cause fire, electric
shock and injury.
Since body static electricity may cause serious damage to MOS
field-effect transistor and other sensitive elements please don't touch the
interior devices, such as PCB, IGBT module etc. before any measure is
took to prevent static electricity.
Keep all marks and labels are clear to read. Replace the lost or worn
mark at any moment.
Please keep the user manual near the inverter that can be reached easily
and give this manual to the users who use the product.
Danger!
Warning!
Caution!