Plc Operating (Group P5) - Alpha 6000S series User Manual

Chapter 5 Detailed Function Introductions

5.6 PLC Operating (Group P5)

P5.00 PLC Operating mode
0: Single cycle 1
2: Continuous operation
Notes:

Single cycle 1
The inverter stops automatically after one cycle of operation and will start when receiving RUN command
again. As shown in Figure. 5-5-1.
Running frequency (Hz)
运行频率(Hz)
Run command 运行命令

Single cycle 2 (holding the final value)
The inverter will hold the operating frequency and direction of last step after completing one cycle of
operation. As shown in Figure. 5-5-2
130
Setting range: 0~2 [2]
1: Single cycle 2 (holding the final value)
f2
f1
f3
T1 T2 T3
Figure. 5-5-1 Stop mode after single cycle of PLC
f7
f6
f5
f4
T4 T5 T6 T7
Time
时间