Alpha 6000S series User Manual page 19

Chapter 2 Installation and Wiring
Catego Terminal
ry label
Y1
Open collector output
Y2
Y2
Open collector output
Y3
Y3
TA
TB
Relay output
TC
BRA
BRB
Relay output
(exclusive for
35R5GB and above
models, located on the
BRC
extension board,
extended function)
10V +10V power supply
24V +24V power supply
IO extension board
24V1
+24 V power
Multi-function input
PLC
common port
Multi-function input
PLC1 common port of IO
extension board
Reference ground of
GND
+10 V power supply
Common port of
COM
+24V power supply
Common port of
COM1 +24V power supply of
IO extension board
CME Common port of
18
Description of terminal
Name
multi-function on-off output
terminal through
programming, please see
Section 5.4 of Chapter V
Function Description of
Output Terminals of I/O
Terminal Control (Group P3)
for details.
It can be defined as a
multi-function relay output
terminal through
programming, please see
Section 5.4 of Chapter V
Function Description of
Output Terminals of I/O
Terminal Control (Group P3)
for details.
It can be defined as a
multi-function relay output
terminal through
programming, please see
Section 5.4 of Chapter V
Function Description of
Output Terminals of I/O
Terminal Control (Group P3)
for details.
Provide +10V power supply
externally
(Reference ground: GND)
Provide +24V power supply
externally
(Reference ground: COM)
Provide +24V power supply
externally
(Reference ground: COM1)
Common port of
multi-function input terminal
Common port of
multi-function input terminal
of IO extension board
Reference ground of analog
signal and +10 V power
supply
Used in conjunction with
other terminals
Used in conjunction with
other terminals
Common port of
function
output
Range of operating voltage: 0V~26V
Maximum output current: 50mA
Y terminals are exclusive for 35R5GB
and above models. Y1 is a control
board terminal with the common port
of CME, Y2 ~ Y3, located on the
extension board, are extension
terminals with the common port of
CME1.
TA-TB: NC;
TA-TC: NO.
Contact capacity:
250VAC/2A (COSΦ=1)
250VAC/1A (COSΦ=0.4)
30VDC/1A
BRA-BRB: NC;
BRA-BRC: NO.
Contact capacity:
250VAC/2A (COSΦ=1)
250VAC/1A (COSΦ=0.4)
30VDC/1A
Maximum output current 30 mA
Open circuit voltage can be up to 12V
Maximum output current 200mA
Maximum output current 200mA
PLC is connected with 24V internally
while leaving the factory
PLC1 is connected with 24V1
internally while leaving the factory
Isolated to COM from inside
Common port of +10 V, AI1, AI2, AI3,
AO1, AO2, AO3 signals
Isolated to GND, and short connected
with CME while leaving the factory
Isolated to GND, and short connected
with CME1 while leaving the factory
Short connected with COM while
Specification