Saving The Configuration Changes; Web Ui Access Level Management; Changing User Level Password - Grandstream Networks WP820 Administration Manual

The computer must be connected to the same sub-network as the WP820. This can be easily done by connecting the
computer to the same hub or switch as the WP820.
The default administrator username and password are "admin"; the default end-user username is "user" and the password
is "123".
If 'Disable web UI access' parameter is enabled under Advanced settings
disabled.
Web GUI Languages
Currently the WP820 web GUI supports English, Chinese languages.
Users can select the displayed language in web GUI login page, or at the upper right of the web GUI after logging in

Saving the Configuration Changes

When changing any settings, always submit them by pressing Save and Apply buttons. If using the Save button, after making
all the changes, click on the Apply button on top of the page to submit.

Web UI Access Level Management

There are two default passwords for the login page:
Userna
User Level
me
End User Level user
Administrator
admin
Level

Changing User Level Password

1. Access the Web GUI of your WP820 using the admin's username and password. (Default username and password are:
admin/admin).
2. Press Login to access your settings.
3. Go to System Settings ��
4. In User Info Management, locate user password section:
Type in the admin password in the Current Admin Password field.
Type in your new user password in New User Password field.
Figure 8: WP820 Web GUI Language
Passwo
Web Pages Allowed
rd
Only Status, Phone Settings, System Settings, Maintenance and System Application
123
with limited options.
admin All pages
Table 8: Web UI Access Level Management
Security Settings.
�� System security; web UI access will be