Saving the Configuration Changes
When changing any settings, always submit them by pressing Save and Apply buttons. If using the Save button, after making
all the changes, click on the Apply button on top of the page to submit.
Web UI Access Level Management
There are two default passwords for the login page:
User Level
Username
End User Level
user
Administrator
admin
Level
Changing User Level Password
1. Access the Web GUI of your WP820 using the admin's username and password. (Default username and password are:
admin/admin).
2. Press Login to access your settings.
3. Go to System Settings
4. In User Info Management, locate user password section:
Type in the admin password in the Current Admin Password field.
Type in your new user password in New User Password field.
Type in again same entered password in Confirm New User Password field.
5. Press Save and Apply buttons to save your new settings.
Figure 7: WP820 Web GUI Language
Password
Web Pages Allowed
Only Status, Phone Settings, System Settings, Maintenance and System
123
Application with limited options.
admin
All pages
Security Settings.
Figure 8: User Level Password