System Diagnostics; Notification Events - Grandstream Networks GHP6 Series Administration Manual

Download and Process All
Available Config Files
User Protection
3CX Auto Provision
Advanced Settings
Parameter
Validate Hostname in Certificate
Enable SIP NOTIFY Authentication
Factory Reset

System Diagnostics

Syslog
Syslog is a protocol that computer systems use to send event data logs to a central location for storage. Logs can then be
accessed by analysis and reporting software to perform audits, monitoring, troubleshooting, and other essential IT operational
tasks
Parameter
Syslog Protocol
Syslog Server
Syslog Level
Syslog Keyword Filter
Send SIP Log

Notification Events

Action URL
The following section describes how we can use the settings present in the GHP to configure customizable notifications
Parameter
By default, the device will follow cfgMAC.xml, cfgMAC, cfgMODEL.xml, cfg.xml,
devMAC.cfg sequence searches for the first available configuration file and updates the
configuration file, and the subsequent configuration files will be ignored.If this
configuration item is enabled, the device will follow cfg.xml, cfgMODEL.xml, cfgMAC,
cfgMAC.xml, devMAC.cfg downloads configuration files one by one and loads updates. If
the same configuration items exist between files, the configuration items that are later in
the download order will overwrite the previous contents.
When user protection is on, P-values that the user sets will not be changed by provision or
provider.
If enabled, the phone will send SUBSCRIBE requests to the multicast address in LAN during
bootup for the automatic provisioning. This feature requires 3CX server support.
Configures tp validate the hostname in the SSL certificate.
Device will challenge NOTIFY with 401 when set to "Yes".
Initiate factory reset.
All the configuration on the device will be erased.
Allows sending syslog through secured TLS protocol to the syslog server.
Note: CA verification is required.
The URL/IP address for the syslog server.
Selects the level logging of syslog.
Syslog will be filtered based on the configured keywords. Multiple keywords can be separated by ",".
Configures whether the SIP log will be included in the syslog messages.
Description
Description
Description