System Updates - Grandstream Networks GXV3350 Administration Manual

Account Settings page allows to configure SIP settings for each account. Tap on Account# to access the settings, when
configured press sign (on the top right corner) to confirm the changes, or press back button to cancel them. Users can
press Empty configuration on the bottom of the page to clear all the settings. Following settings can be configured for each
account. Refer to [Account/General Settings] for description of each option.
Account Activation.
Account Name.
SIP Server.
SIP User ID.
SIP Authentication ID.
SIP Authentication Password.
Outgoing Proxy Server.
Voicemail User ID.
Display Name.

System Updates

This page allows to initiate upgrade process by checking if a new firmware is available in the configured firmware server path,
and then upgrading if available. Users can press Settings
phone's LCD. Following settings can be configured from this screen:
Firmware upgrade and configuration file detection. This will send a request to firmware and provisioning server to
upgrade/provision the phone if the files are available on the servers.
Firmware:
Upgrade Mode: This field allows the user to choose the firmware upgrade method: TFTP, HTTP or HTTPS.
HTTP/HTTPS username: The user name for the HTTP/HTTPS server if set up on the server.
HTTP/HTTPS password: The password for the HTTP/HTTPS server if set up on the server.
Firmware Server Path: This defines the server path for the firmware server. It can be different from the configuration
server for provisioning.
Config:
Upgrade mode: This field allows the user to choose the provisioning method: TFTP, HTTP or HTTPS.
HTTP/HTTPS username: The user name for the HTTP/HTTPS server if set up on the server.
HTTP/HTTPS password: The password for the HTTP/HTTPS server if set up on the server.
Config Server Path: This defines the server path for the provisioning server. It can be different from the firmware
server.
Syslog
Syslog level: Select the level of logging for syslog. The default setting is "None". There are 4 levels: DEBUG, INFO,
WARNING and ERROR.
System log protocol: Select the protocol of syslog (UDP or SSL/TLS).
Syslog server address: The URL/IP address for the syslog server. If the GXV3350 has network connection, the phone will
send the syslog packets to this server address.
Note
Syslog server supports IPv4/IPv6 IP addresses.
System log keyword filtering: Only send the syslog with keyword, multiple keywords are separated by comma. Example:
set the filter keyword to "SIP" to filter SIP log.
to configure Firmware/Provisioning settings directly from the