Other Peripheral Equipment Applicability - Mitsubishi Electric MELSEC-F FX3G Series User Manual

FX Series Programmable Controllers
3G
User's Manual - Hardware Edition
5.6

Other Peripheral Equipment Applicability

5.6.1 Other Peripheral Equipment Applicability
Model name
GOT1000 Series
F940WGOT
F940GOT F940 Handy GOT Not available
F930GOT(-K)
F920GOT(-K)
ET-940
FX-10DM(-SET0)
FX-10DU
*1. The F940GOT and ET-940 whose version is former than Ver. 1.10 do not support the transparent (2-
port) function of the GX Developer.
66
Applicability
Standard monitor OS, communication driver and option OS which support the FX
are required.
For details, refer to the GOT manual.
This series is subject to the following restrictions when connected using unsupported
standard monitor OS, communication driver or option OS.
Applicable Contents of restrictions
• Programming is enabled only in the function ranges such as instructions, device ranges
and program sizes available in the FX
• The list editor function for MELSEC-FX is not available. When using the list editor
function for MELSEC-FX, upgrade the standard monitor OS, communication driver and
option OS to the version compatible with the FX
Check the applicability of other items in the GOT manual.
The following restriction applies when connected.
Not available
Contents of restrictions
Programming is enabled only in the function ranges such as instructions, device ranges
Not available
and program sizes available in the FX
For applicable models, refer to the GOT manual.
Not available
For connection using the 2-port interface function
Not available
The following restriction applies when connected.
Contents of restrictions
Not available Programming is enabled only in the function ranges such as instructions, device ranges
and program sizes available in the FX
For supported models and device ranges, refer to the FX-10DM USER'S MANUAL
(JY992D86401).
The following restriction applies when connected.
Contents of restrictions
Not available It is limited to the device range and function range supported by the highest class model
(FX or FX
1N 2N
For supported models and device ranges, refer to the FX-10DU-E/FX-20DU-E User's
Manual (JY992D54801).
5 Version Information and Peripheral Equipment Connectability
5.6 Other Peripheral Equipment Applicability
Remarks
and FX
1N
and FX
1N
1N and FX
) applicable in the product version.
PLCs.
1NC
PLC.
3G
PLCs.
1NC
*1
, refer to Section 5.5.
1NC PLCs.
PLC
3G