Appendix A-2 Peripheral Product Applicability (Except Programming Tools); Appendix A-2-1 Peripheral Product Applicability - Mitsubishi Electric MELSEC FX3U Programming Manual

FX /FX /FX Series Programmable Controllers
3G 3U 3UC
Programming Manual - Basic & Applied Instruction Edition

Appendix A-2 Peripheral product applicability (except programming tools)

Appendix A-2-1 Peripheral product applicability

FX PLC
3G
Product Name
GOT1000 Series
F940WGOT
F940GOT,
F940 Handy GOT
F930GOT (-K)
F920GOT (-K)
ET-940
FX-10DM (-SET0)
FX-10DU
*1. The F940GOT and ET-940 whose version is former than Ver.1.10 do not support the transparent (2-
port) function of the GX Developer.
956
Applicability
This series is compatible with the FX
later is used.
GT15 and GT11:
Standard monitor OS[03.14.**]or later
Communication driver MELSEC-FX[03.14.**]or later Option OS List editor
for MELSEC-FX[03.14.**]or later
GT10:
Standard monitor OS[01.10.**]or later
Communication driver MELSEC-FX[01.06.**]or later
Applicable This series is subject to the following restrictions when connected using
unsupported standard monitor OS, communication driver or option OS.
Contents of restrictions
• Programming is enabled only in the function ranges such as instructions, device
ranges and program sizes available in the FX
• The list editor function for MELSEC-FX is not available. When using the list
editor function for MELSEC-FX, upgrade the standard monitor OS,
communication driver and option OS to the version compatible with the FX
PLC.
Check the applicability of other items in the GOT manual.
Not applicable The following restriction applies when connected.
Not applicable
Contents of restrictions
• Programming is enabled only in the function ranges such as instructions, device
Not applicable
ranges and program sizes available in the FX
Not applicable
For connection using the 2-port interface function
Not applicable
The following restriction applies when connected.
Contents of restrictions
Not applicable Programming is enabled only in the function ranges such as instructions, device
ranges and program sizes available in the FX
The following restriction applies when connected.
Contents of restrictions
Not applicable It is limited to the device range and function range supported by the highest class
model (FX
A Programming Tool Applicability and Version Upgrade History
A-2 Peripheral product applicability (except programming tools)
Remarks
3G
→ For applicable models, refer to the GOT manual.
→ For supported models and device ranges, refer to the FX-10DM
USER' MANUAL (Manual No. JY992D86401).
or FX ) applicable in the product version.
1N 1NC
→ For supported models and device ranges, refer to the FX-10DU
Operation Manual (Manual No. JY992D34701).
PLC when GT Designer2 Ver. 2.85P or
and FX PLCs.
1N 1NC
and FX PLCs.
1N 1NC
*1
, refer to Appendix A-1-4.
and FX PLCs.
1N 1NC
3G