Scan Margin Tbl - Kyocera TASKalfa 1800 Service Manual

U403

Scan Margin Tbl

Description
Adjusts margins for scanning the original on the contact glass.
Purpose
Make the adjustment if margins are incorrect.
Adjustment
1. Press the start key.
2. Press the system menu key.
3. Place an original and press the start key to make a test copy.
4. Press the system menu key.
5. Select the item to be adjusted.
Display
A Margin
B Margin
C Margin
D Margin
6. Change the setting value using change keys * or numeric keys.
* : Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)
Increasing the value makes the margin wider, and decreasing it makes the margin narrower.
7. Press the start key. The value is set.
Caution
If the above adjustment does not optimize the margins, perform the following maintenance modes.
U034 -------- U402 -------- U403
(P.1-3-24) (P.1-3-72)
Completion
Press the stop key. The indication for selecting a maintenance item No. appears.
Description
Scanner left margin.
Scanner leading edge margin.
Scanner right margin.
Scanner trailing edge margin.
Leading edge margin of the copy image
(3.0 ±2.5 mm)
Left margin of
the copy image
(2.5 +1.5/-2.0 mm)
Trailing edge margin of the copy image
(3.0 ±2.5 mm)
Setting
range
0.0 to 10.0
0.0 to 10.0
0.0 to 10.0
0.0 to 10.0
Right margin of
the copy image
(2.5 +1.5/-2.0 mm)
Figure 1-3-15
1-3-73
2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
Initial Change in
setting value per step
2.0
2.0
2.0
2.0
0.1
0.1
0.1
0.1