Kyocera TASKalfa 1800 Service Manual page 227

Defective part
Scopper guide
7
Conveying roller
(before and after
8
of scanning)
Drive belt
9
Check description
Check that the scopper guide is
smoothly operative.
Check whether the conveying
roller is dirty.
Check if the drive belt is jumping
gear teeth.
If the scopper guide does not rotate smoothly,
re-install.
If the conveying roller is dirty, clean.
If the drive belt is jumping gear teeth, re-mount
the belt tensioner.
1-4-55
2NC/2NF/2NG/2NN/3P7/3P8/3P9
Corrective Action